This Titanium Grade 5 stock sheet offers exceptional strength and corrosion resistance for critical heating and cooling system components. Precision manufactured to exacting tolerances for demanding industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.701" |
| Length | 44" |
| Width | 31" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.701 inches thick, 44 inches in length, and 31 inches in width. Composed of approximately 90% Titanium, 6% Aluminum, and 4% Vanadium, it exhibits a superior strength-to-weight ratio, excellent corrosion resistance in aggressive media, and good weldability. Its high operating temperature capabilities make it ideal for heat exchangers, high-pressure vessels, and critical structural elements within heating and cooling infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free from contaminants before fabrication. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as Gas Tungsten Arc Welding (GTAW) in an inert atmosphere. 3. Implement proper cutting and machining techniques to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding techniques on Titanium Grade 5. | Employ inert gas shielding (e.g., Argon) and appropriate filler materials specifically designed for Titanium Grade 5 to prevent contamination and maintain weld strength. |
| Insufficient surface preparation leading to weld porosity or embrittlement. | Thoroughly degrease and clean all mating surfaces and filler materials immediately prior to welding to remove any oxides or organic contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Tubing and Plates, High-Pressure Vessel Components, Corrosion-Resistant Piping and Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||