This robust 304 stainless steel sheet provides exceptional corrosion resistance and thermal stability. Its substantial 0.370" thickness makes it ideal for high-demand industrial heating and cooling applications, ensuring longevity and performance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.370" |
| Length | 45" |
| Width | 34" |
Precision-manufactured to tight tolerances, this 0.370" thick sheet offers a nominal length of 45" and a width of 34". Constructed from Type 304 stainless steel, it exhibits excellent resistance to oxidation and corrosion, making it suitable for extreme temperature environments. The austenitic structure provides good formability and weldability, while its non-magnetic properties are beneficial in certain sensitive applications. This material is extensively utilized in heat exchangers, furnace components, and industrial ductwork within the HVAC and process industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare mounting surfaces for structural integrity, ensuring they are clean and free of contaminants. 3. Securely fasten the sheet using appropriate welding, bolting, or fastening methods, considering thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-temperature applications. | Always select sheet thickness based on calculated thermal and mechanical stresses, ensuring adequate structural support and heat transfer. |
| Inadequate surface preparation before installation. | Thoroughly clean all surfaces to remove oils, grease, and debris that could compromise weld integrity or cause premature corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Furnace Components, HVAC Ductwork and Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||