This Titanium Grade 5 stock sheet offers exceptional performance for critical pressure and temperature control systems. Engineered for extreme environments, it provides superior corrosion resistance and a high strength-to-weight ratio.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.251" |
| Length | 36" |
| Width | 39" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.251 inches in thickness, 36 inches in length, and 39 inches in width. Grade 5 titanium offers an optimal balance of strength, fracture toughness, and fatigue strength, making it suitable for aerospace components, medical implants, and demanding chemical processing equipment. Its excellent biocompatibility and resistance to chloride stress corrosion cracking ensure reliability in harsh operating conditions. This alloy boasts a typical tensile strength exceeding 138 ksi and a yield strength of 130 ksi, with a density of 0.163 lb/in³.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. Inspect for any surface defects. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools designed for titanium. 3. Fabricate and assemble components following approved engineering drawings and welding procedures, if applicable. Ensure proper post-weld heat treatment is performed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium, leading to tool wear and poor cut quality. | Employ carbide or diamond-tipped cutting tools with specialized cooling lubricants designed for titanium alloys. |
| Inadequate post-weld heat treatment, resulting in reduced mechanical properties or increased susceptibility to cracking. | Follow industry-standard post-weld heat treatment cycles for Ti-6Al-4V to restore optimal metallurgical integrity and mechanical performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Cryogenic temperature control systems, Corrosive fluid handling components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||