This premium 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Engineered for demanding environments, it excels in pressure and temperature control applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.806" |
| Length | 46" |
| Width | 14" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts a substantial 0.806" thickness, a generous 46" length, and a 14" width, providing ample material for fabrication. Fabricated from AISI 304 stainless steel, it exhibits excellent resistance to a wide range of corrosive media and elevated temperatures, making it an ideal choice for pressure vessels, heat exchangers, and critical structural components within chemical processing, food and beverage, and high-temperature industrial settings. Its consistent composition ensures predictable performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping tools are appropriate for 0.806" thick stainless steel. 2. Clean all mating surfaces thoroughly to remove any contaminants that could compromise sealing integrity. 3. Securely fasten the sheet using appropriate welding or bolting techniques, adhering to design specifications for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding rods for 304 stainless steel, leading to compromised corrosion resistance. | Utilize 308L or 309L stainless steel welding consumables to maintain the material's inherent corrosion resistance after fabrication. |
| Insufficient edge preparation for welding, resulting in weak or porous joints. | Bevel edges to the recommended angle (typically 30-45 degrees) to ensure full penetration and a strong weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Corrosion-resistant structural elements, High-temperature ducting systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||