This Titanium Grade 5 stock sheet is engineered for extreme environments. Its exceptional strength, light weight, and superior corrosion resistance make it ideal for high-pressure hydraulic systems and critical components.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 29" |
| Width | 36" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers an unparalleled strength-to-weight ratio of 150 ksi tensile strength. With dimensions of 0.469" thickness, 29" length, and 36" width, it provides substantial material for fabrication. Its inherent biocompatibility and resistance to saltwater, chlorine, and most industrial chemicals ensure longevity in corrosive hydraulic fluid environments. This alloy's excellent fatigue strength and high operating temperature capability make it the premier choice for aerospace, marine, and advanced industrial hydraulic manifold and component construction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification against project specifications. 2. Machine to required component dimensions using appropriate tooling and coolant. 3. Perform post-machining inspection for critical tolerances and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel machining practices without accounting for titanium's thermal conductivity. | Employ higher feed rates and lower speeds with specialized tooling and ample coolant to manage heat effectively and prevent tool wear. |
| Inadequate cleaning of the titanium surface before welding or bonding. | Thoroughly degrease and brush the titanium surface with a dedicated stainless steel wire brush to remove any oxide layers or contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifolds, High-Pressure Fluid Connectors, Actuator Components, Corrosive Fluid Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||