This heavy-gauge 304 stainless steel stock sheet is engineered for robust hydraulic system construction. Its superior corrosion resistance ensures longevity in aggressive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.810" |
| Length | 41" |
| Width | 46" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers exceptional dimensional stability for critical hydraulic manifold and component fabrication. The 0.810-inch thickness provides substantial structural integrity, essential for high-pressure fluid power systems. Composed of a minimum of 18% chromium and 8% nickel, this austenitic stainless steel exhibits excellent resistance to a wide range of corrosive media, making it ideal for marine, chemical processing, and industrial hydraulic applications. The specified dimensions (41" length x 46" width) facilitate efficient material utilization in custom machining and assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with surrounding hydraulic fluids and environmental conditions. 2. Precisely cut the stock sheet to required dimensions using appropriate machining techniques for stainless steel. 3. Ensure all cut edges are deburred and treated to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 or higher-grade stainless steel for hydraulic components exposed to moisture, chemicals, or saltwater. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and polish all cut edges to prevent stress risers and maintain the material's protective passive layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Custom hydraulic system fabrication, Corrosion-resistant hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||