This high-performance Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical components in pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.947" |
| Length | 46" |
| Width | 38" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.947 inches thick, 46 inches in length, and 38 inches in width. Grade 5 offers a unique combination of high strength, excellent corrosion resistance, and good weldability, with a density significantly lower than most metals. Its high tensile strength and fatigue strength at elevated temperatures make it a preferred material for applications involving significant thermal cycling and corrosive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys to prevent work hardening. 3. Implement proper welding procedures, including inert gas shielding, to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive tool wear and poor cut quality. | Employ specialized carbide or ceramic cutting tools, and ensure adequate coolant is used. |
| Inadequate cleaning before welding, resulting in contamination and compromised weld strength. | Thoroughly degrease and brush the weld area with stainless steel brushes dedicated solely to titanium. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel components, Heat exchanger plates and shells, Corrosion-resistant piping and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||