This Titanium Grade 5 stock sheet, precisely manufactured to 0.641" thickness, 47" length, and 13" width, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical hydraulic systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.641" |
| Length | 47" |
| Width | 13" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet provides unparalleled performance in corrosive and high-pressure hydraulic applications. Its nominal dimensions of 0.641" thickness, 47" length, and 13" width ensure compatibility with standard fabrication processes. The material's inherent properties, including a high yield strength (minimum 128 ksi), excellent fatigue strength, and biocompatibility, make it ideal for applications requiring long-term reliability and resistance to saltwater, chemicals, and extreme temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and shaping tools are specifically rated for titanium alloy processing. 2. Clean the sheet surface thoroughly to remove any contaminants prior to welding or joining. 3. Follow recommended welding procedures for Ti-6Al-4V, including inert gas shielding and controlled preheating/post-heating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, leading to excessive tool wear and poor cut quality. | Utilize carbide or ceramic-tipped cutting tools specifically designed for titanium alloys. |
| Inadequate surface preparation before welding, causing weld porosity and reduced joint strength. | Thoroughly degrease and mechanically clean the weld joint area immediately before welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Corrosion-resistant hydraulic cylinder components, Marine hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||