This Titanium Grade 5 stock sheet delivers exceptional strength-to-weight ratio for critical pulling and lifting applications. Its superior corrosion resistance ensures longevity in harsh environments, making it the industrial standard.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.802" |
| Length | 13" |
| Width | 30" |
Engineered for reliability and performance, this Titanium Grade 5 stock sheet boasts a precise thickness of 0.802 inches, a length of 13 inches, and a width of 30 inches. Grade 5 titanium, also known as Ti-6Al-4V, offers an optimal balance of high strength, low density, and excellent corrosion resistance, making it ideal for aerospace, marine, and demanding industrial fabrication. Its biocompatibility also lends itself to specialized medical equipment. This sheet is manufactured to rigorous standards, ensuring consistent material properties for critical load-bearing components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material integrity and dimensions against project specifications. 2. Prepare mating surfaces for proper welding or joining. 3. Fabricate and integrate into the pulling or lifting apparatus following established engineering protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners with titanium without proper consideration for galvanic corrosion. | Utilize titanium or compatible high-grade stainless steel fasteners, or employ appropriate isolation methods to prevent galvanic corrosion. |
| Improper welding techniques leading to embrittlement or reduced strength. | Employ inert gas shielded welding (e.g., GTAW/TIG) in a controlled atmosphere and utilize pre-heating and post-weld heat treatment as per industry best practices for titanium alloys. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom rigging components, High-strength structural supports for lifting equipment, Marine anchor and towing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||