This robust 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Its precise dimensions make it ideal for custom fabrication in demanding pulling and lifting environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.433" |
| Length | 21" |
| Width | 23" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.433 inches in thickness, 21 inches in length, and 23 inches in width. Fabricated from high-grade 304 stainless steel (ASTM A240 Type 304), it exhibits excellent tensile strength, yield strength, and crucial corrosion resistance, particularly against pitting and crevice corrosion in various industrial atmospheres. This makes it exceptionally well-suited for use as a component in custom-engineered lifting lugs, reinforcement plates for pulling equipment, or as a base plate in marine and chemical processing applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity prior to cutting or modification. 2. Utilize appropriate cutting tools (e.g., waterjet, laser, plasma) for precise edge preparation. 3. Ensure all mounting or welding procedures adhere to relevant industry standards for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners with 304 stainless steel. | Always use stainless steel fasteners (e.g., 304 or 316 grade) to prevent galvanic corrosion. |
| Inadequate edge preparation for welding. | Properly bevel and clean weld edges to ensure full penetration and strong, corrosion-resistant welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Lifting Lugs and Hardware, Reinforcement Plates for Winches and Hoists, Marine and Offshore Equipment Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||