This high-performance Titanium Grade 5 stock sheet, precisely sized at 0.417" thick, 28" wide, and 39" long, is engineered for exceptional corrosion resistance and durability in aggressive plumbing and janitorial environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.417" |
| Length | 28" |
| Width | 39" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers an unparalleled combination of high strength-to-weight ratio and outstanding resistance to a wide spectrum of corrosive media. Its 0.417-inch thickness, 28-inch width, and 39-inch length make it ideal for custom fabrication of tanks, piping, fixtures, and structural components within demanding industrial, marine, and chemical processing plumbing and janitorial systems where longevity and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris before cutting or forming. 2. Utilize appropriate cutting tools designed for titanium alloys to prevent material degradation. 3. Employ proper welding or joining techniques for titanium, adhering to industry best practices for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication. | Employ specialized carbide or diamond-tipped tooling with high-pressure coolant to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly clean the weld area with a degreaser and wire brush to remove any oxides or contaminants that could compromise weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Chemical processing equipment fabrication, Marine plumbing and fixtures, High-purity water systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||