This high-quality 304 stainless steel stock sheet offers superior corrosion resistance and durability, making it an ideal choice for demanding plumbing and janitorial environments. Engineered for longevity and performance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.163" |
| Length | 31" |
| Width | 18" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.163 inches in thickness, 31 inches in length, and 18 inches in width. Composed of a chromium-nickel alloy, 304 stainless steel provides excellent resistance to oxidation and a wide range of corrosive media, crucial for maintaining hygiene and preventing degradation in plumbing and janitorial fixtures. Its robust gauge ensures structural integrity for fabricated components, preventing warping or premature failure under typical operational stresses. The smooth, non-porous surface finish is inherently hygienic and easy to clean, meeting stringent sanitary requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cutting lines accurately on the sheet. 2. Utilize appropriate cutting tools (e.g., shear, plasma cutter) for precise fabrication. 3. Deburr and finish edges to ensure safety and proper fitment. 4. Secure sheet in intended application using approved fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or inaccurate dimensions. | Employ high-quality cutting equipment specifically designed for stainless steel, and always follow with proper deburring procedures. |
| Improper storage leading to scratches or contamination. | Store sheets flat, protected by a suitable covering, and in a clean, dry environment to maintain surface integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated sinks and drains, Splash guards and protective panels in janitorial areas, Backsplashes and countertops in commercial kitchens.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||