This Titanium Grade 5 stock sheet is engineered for high-performance hydraulic systems. Its exceptional strength, corrosion resistance, and lightweight properties make it ideal for critical components subjected to extreme conditions.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.891" |
| Length | 20" |
| Width | 44" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet boasts superior mechanical properties essential for demanding hydraulic environments. Measuring 0.891 inches thick, 20 inches in length, and 44 inches in width, it provides substantial material for fabrication. Titanium Grade 5 (Ti-6Al-4V) offers an outstanding strength-to-weight ratio, excellent corrosion resistance in aggressive media, and good fatigue strength, ensuring longevity and reliability in high-pressure hydraulic circuits. Its biocompatibility and non-magnetic nature further expand its utility in specialized hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage prior to cutting. 2. Utilize appropriate cutting tools designed for titanium alloys, such as waterjet or EDM, to achieve precise dimensions. 3. Ensure proper edge finishing and deburring to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper precautions. | Employ specialized tooling for titanium, such as carbide-tipped blades or abrasive waterjet cutting, to prevent tool wear and ensure clean cuts. |
| Inadequate post-cutting edge treatment. | Thoroughly deburr and chamfer all cut edges to remove sharp points and potential stress risers that could lead to premature failure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Hydraulic cylinder components, Corrosion-resistant hydraulic fittings and connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||