High-performance Titanium Grade 5 stock sheet engineered for critical pressure and temperature control systems. Delivers exceptional strength, corrosion resistance, and reliability under extreme conditions.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.676" |
| Length | 33" |
| Width | 16" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 stock sheet measures 0.676 inches thick, 33 inches long, and 16 inches wide. Composed of Ti-6Al-4V alloy, it exhibits a tensile strength exceeding 130 ksi and a yield strength over 120 ksi, with excellent resistance to saltwater, chlorine, and various industrial chemicals. Its biocompatibility and high melting point make it ideal for aerospace, chemical processing, and medical device fabrication where robust performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from any contaminants. 2. Carefully position the Titanium Grade 5 stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate corrosion-resistant fasteners and sealing methods, adhering to pressure vessel codes where applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to premature corrosion or seal failure. | Thoroughly degrease and inspect all contact surfaces before installation. |
| Using incompatible fasteners that can cause galvanic corrosion or compromise structural integrity. | Always select fasteners made from materials compatible with Titanium Grade 5, such as specific stainless steels or titanium alloys, as per industry standards. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Heat exchanger components, Corrosive fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||