This Titanium Grade 5 stock sheet is engineered for superior performance in high-stress hydraulic systems. Offering exceptional strength, corrosion resistance, and biocompatibility, it ensures longevity and reliability in challenging operational conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.780" |
| Length | 38" |
| Width | 19" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet measures 0.780" in thickness, 38" in length, and 19" in width. Composed of Ti-6Al-4V, it exhibits an ultimate tensile strength of 130-150 ksi and a yield strength of 120-140 ksi, combined with excellent fatigue strength and seawater corrosion resistance. Its lightweight nature (approximately 4.43 g/cm³) makes it ideal for aerospace and marine hydraulic components where weight reduction is critical without compromising structural integrity or performance under extreme pressure and temperature fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate cutting tools for titanium alloys. 3. Perform any necessary fabrication, welding, or machining adhering to best practices for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize specialized carbide or diamond-tipped cutting tools with adequate cooling to prevent tool wear and material degradation. |
| Improper welding procedures leading to embrittlement. | Employ inert gas shielding (e.g., Argon) during welding and maintain strict cleanliness to prevent contamination and ensure weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold fabrication, Corrosion-resistant hydraulic cylinder components, Aerospace hydraulic system structural parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||