This Titanium Grade 5 stock sheet provides exceptional performance in corrosive environments. Its high strength-to-weight ratio and superior fatigue strength make it ideal for critical hydraulic system components.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.610" |
| Length | 17" |
| Width | 43" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.610 inches thick, 17 inches in length, and 43 inches in width. Exhibiting an impressive tensile strength of approximately 138,000 psi and yield strength around 130,000 psi, this alloy boasts excellent biocompatibility and resistance to chloride stress corrosion cracking. Its lightweight nature, roughly 60% the density of steel, significantly reduces overall system mass without compromising structural integrity, making it a prime candidate for high-pressure hydraulic manifold blocks, pump housings, and cylinder components in aerospace, marine, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating environment. 2. Ensure all cutting, machining, and forming operations are performed using appropriate tooling and speeds to maintain material integrity and prevent work hardening. 3. Implement proper cleaning procedures to remove any contaminants before assembly into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel machining practices without adjustment for titanium's unique properties. | Utilize specialized tooling, lower cutting speeds, and increased feed rates with ample coolant to prevent overheating and tool wear. |
| Inadequate deburring of cut edges, leading to potential stress risers. | Thoroughly deburr all edges using appropriate methods to ensure a smooth finish and prevent premature failure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifold Blocks, High-Pressure Cylinder Components, Pump Housings in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||