This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-pressure hydraulic systems and demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.530" |
| Length | 28" |
| Width | 26" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.530 inches in thickness, 28 inches in length, and 26 inches in width. Exhibiting excellent biocompatibility and a high tensile strength of 138,000 psi (min), it is perfectly suited for aerospace, marine, and critical industrial hydraulic components where reliability and resistance to harsh chemicals and saltwater are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage prior to cutting. 2. Utilize appropriate cutting tools designed for titanium alloys, ensuring proper coolant application to prevent overheating. 3. Follow standard fabrication procedures for Titanium Grade 5 when shaping or welding, adhering to industry best practices for stress relief and material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to rapid tool wear and poor cut quality. | Employ specialized carbide or high-speed steel tooling with appropriate coatings, and maintain optimal cutting speeds and feed rates for titanium. |
| Inadequate post-fabrication cleaning, leading to potential contamination and reduced corrosion resistance. | Thoroughly clean all surfaces after fabrication using non-abrasive methods and appropriate degreasers to remove any residual cutting fluids or contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic manifold blocks, High-pressure cylinder components, Corrosion-resistant hydraulic fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||