This Titanium Grade 5 stock sheet, measuring 0.930" thick by 32" long and 29" wide, offers exceptional strength-to-weight ratio and corrosion resistance for critical heating and cooling systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.930" |
| Length | 32" |
| Width | 29" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet meets stringent industry standards for aerospace and demanding industrial environments. The 0.930" thickness provides significant structural integrity and thermal performance, ideal for heat exchangers, pressure vessels, and critical ductwork in corrosive atmospheres. Its inherent biocompatibility and excellent fatigue strength ensure longevity and reliability in high-cycle applications within the heating and cooling sector.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure clean and dry surfaces for welding or joining. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as Gas Tungsten Arc Welding (GTAW) with inert gas shielding. 3. Inspect all joints for integrity and compliance with design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding techniques on Titanium Grade 5. | Always use specialized welding procedures for titanium, including proper shielding gas and filler materials, to prevent contamination and ensure weld integrity. |
| Inadequate surface preparation before joining. | Thoroughly degrease and clean all surfaces to remove oxides and contaminants that can compromise the weld or bond. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Fabrication, Industrial HVAC Systems, Corrosion-Resistant Piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||