This Titanium Grade 5 stock sheet is engineered for critical hydraulic systems requiring superior strength, exceptional corrosion resistance, and light weight. Its precise dimensions ensure seamless integration into complex assemblies.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.690" |
| Length | 30" |
| Width | 13" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.690 inches in thickness, 30 inches in length, and 13 inches in width. Grade 5 titanium offers an optimal balance of high strength (tensile strength typically 130 ksi or 896 MPa), excellent toughness, and superior corrosion resistance, particularly in saline and chemical environments. This makes it an ideal material for high-pressure hydraulic components, subsea equipment, and aerospace applications where material integrity under extreme conditions is paramount. Its biocompatibility and low density further enhance its utility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating environment. 2. Ensure all mating surfaces are clean, deburred, and free from contaminants. 3. Fabricate and install components according to established engineering drawings and industry best practices for titanium machining and assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners without appropriate isolation in corrosive environments. | Employ titanium or other compatible corrosion-resistant fasteners, and consider galvanic corrosion prevention measures. |
| Exceeding recommended cutting speeds or using incorrect tooling during machining, leading to excessive heat buildup and material degradation. | Utilize specialized tooling designed for titanium and maintain appropriate cutting speeds and lubrication to manage heat. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifolds, Subsea oil and gas equipment, Aerospace hydraulic actuators and lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||