This Titanium Grade 5 stock sheet, precisely manufactured to 0.682" thickness, 39" length, and 42" width, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical hydraulic systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.682" |
| Length | 39" |
| Width | 42" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet meets stringent aerospace and industrial standards for hydraulic component fabrication. Its superior tensile strength, fatigue resistance, and excellent corrosion immunity in aggressive media make it the material of choice for high-pressure fluid power systems, downhole drilling equipment, and marine hydraulics. The sheet's precise dimensions (0.682" x 39" x 42") ensure minimal material waste and consistent performance in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Machining operations should be performed with appropriate tooling and coolant. 3. Welding, if required, must adhere to Ti-6Al-4V welding protocols by certified personnel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel machining parameters for titanium. | Employ slower speeds, increased feed rates, and specialized cutting tools designed for titanium alloys to prevent overheating and tool wear. |
| Inadequate post-machining surface preparation. | Thoroughly deburr all edges and ensure surfaces are free of machining marks or residual stress concentrators that could compromise structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic manifold blocks, Cylinder components, Valve bodies, High-pressure tubing, Subsea hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||