This premium Titanium Grade 5 stock sheet, precisely dimensioned at 0.879" x 41" x 23", offers exceptional strength-to-weight ratio and superior corrosion resistance for critical hydraulic systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.879" |
| Length | 41" |
| Width | 23" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.879 inches, a length of 41 inches, and a width of 23 inches. This alloy, comprising approximately 6% aluminum and 4% vanadium, exhibits an ultimate tensile strength exceeding 120 ksi and a yield strength of 110 ksi, with excellent fatigue strength and seawater corrosion resistance. Its biocompatibility and low density make it ideal for high-pressure hydraulic manifolds, specialized fluid power components, and aerospace-grade hydraulic tubing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the specific hydraulic fluid and operating environment. 2. Ensure all mating surfaces are clean, free from contaminants, and properly prepared for assembly. 3. Utilize appropriate machining techniques and fasteners designed for titanium alloys to maintain structural integrity during fabrication and integration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners without proper plating or material consideration. | Employ titanium-specific fasteners or fasteners with appropriate coatings (e.g., Cadmium plating) to prevent galvanic corrosion and ensure secure fastening. |
| Improper heat treatment or welding procedures leading to embrittlement. | Follow established guidelines for titanium welding and heat treatment, typically involving inert gas shielding and controlled temperature cycles to preserve material properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-Pressure Hydraulic Manifolds, Aerospace Fluid Power Components, Submersible Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||