This premium Titanium Grade 5 stock sheet is engineered for high-performance pressure and temperature control systems. Its exceptional strength, low density, and superior corrosion resistance ensure reliability in extreme environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.722" |
| Length | 17" |
| Width | 29" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet offers a robust solution for critical applications. With a precise thickness of 0.722 inches, a length of 17 inches, and a width of 29 inches, it meets stringent dimensional tolerances. Titanium Grade 5 (Ti-6Al-4V) is renowned for its excellent mechanical properties, including high tensile strength and fatigue resistance, coupled with remarkable inertness in corrosive media and at elevated temperatures. This makes it ideal for components in aerospace, chemical processing, marine, and medical devices where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compliance with project specifications and relevant industry standards. 2. Ensure all cutting, machining, and welding procedures adhere to best practices for Titanium Grade 5 to maintain material integrity. 3. Conduct thorough non-destructive testing (NDT) as per design requirements to confirm absence of defects prior to final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fabrication techniques on titanium. | Employ specialized tooling, slower cutting speeds, and appropriate lubricants designed for titanium alloys to prevent galling and excessive heat buildup. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease the titanium surfaces using approved solvents and wire brushes dedicated solely to titanium to prevent contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Heat exchanger components, Aerospace structural elements, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||