This Titanium Grade 5 stock sheet delivers exceptional strength-to-weight ratio and unparalleled corrosion resistance. Precisely manufactured for critical hydraulic systems, it ensures reliability and longevity in harsh environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.743" |
| Length | 31" |
| Width | 26" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.743 inches in thickness, 31 inches in length, and 26 inches in width. It offers a minimum tensile strength of 120 ksi and yield strength of 110 ksi, with excellent fatigue resistance and a low coefficient of thermal expansion. Its biocompatibility and inertness make it ideal for high-pressure hydraulic lines, pump components, valve bodies, and seals in aerospace, medical, and marine hydraulic systems requiring robust and lightweight solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before machining. 2. Utilize appropriate tooling and lubrication for titanium machining to prevent work hardening. 3. Verify dimensional accuracy and surface finish against design specifications post-fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel machining practices for titanium. | Employ specialized tooling, slower speeds, and heavier feeds with adequate coolant to manage titanium's high strength and thermal conductivity. |
| Ignoring surface finish requirements for hydraulic sealing surfaces. | Achieve a fine surface finish (e.g., Ra < 16 microinches) on sealing areas to prevent leaks and ensure component integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Corrosion-resistant hydraulic cylinder barrels, Lightweight hydraulic pump housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||