This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for high-performance hydraulic systems, it ensures reliability in extreme environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.953" |
| Length | 40" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 0.953" thick Titanium Grade 5 sheet measures 40" in length and 31" in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium, it boasts an ultimate tensile strength exceeding 130 ksi and a yield strength of 120 ksi. Its excellent biocompatibility and resistance to saltwater, chloride, and other aggressive media make it a critical component in aerospace hydraulic lines, marine equipment, and high-pressure fluid handling systems where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut and machine to required component dimensions using appropriate tooling for titanium. 3. Integrate into the hydraulic system, ensuring proper sealing and joint integrity according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup. | Employ specialized carbide tooling and optimized feed/speed parameters designed for machining titanium to prevent tool wear and achieve accurate cuts. |
| Inadequate surface preparation before welding or bonding. | Thoroughly clean and degrease all mating surfaces using approved solvents and ensure a controlled atmosphere (e.g., inert gas) during any welding operations to prevent oxidation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Aerospace hydraulic component fabrication, Marine hydraulic system tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||