This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-pressure hydraulic applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.596" |
| Length | 41" |
| Width | 13" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.596 inches, a length of 41 inches, and a width of 13 inches. Its excellent mechanical properties, including high tensile strength, fatigue resistance, and remarkable inertness in corrosive environments, make it a superior material for hydraulic manifold blocks, pressure vessels, and critical component fabrication. The alloy's biocompatibility and non-magnetic nature further broaden its applicability in specialized hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against design requirements. 2. Ensure cutting and machining tools are appropriate for Titanium Grade 5 to prevent contamination and maintain material integrity. 3. Follow established procedures for welding or joining, if applicable, utilizing inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized carbide or high-speed steel tooling with adequate cooling to prevent excessive heat buildup and tool wear. |
| Neglecting proper surface preparation before welding or bonding. | Thoroughly clean the titanium surface with a degreaser and wire brush to remove any oxides or contaminants that could compromise the joint. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic manifold blocks, High-pressure hydraulic cylinders, Corrosion-resistant hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||