This Titanium Grade 5 stock sheet is engineered for high-performance hydraulic systems. Its exceptional strength, lightweight nature, and resistance to corrosion make it ideal for critical components.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.589" |
| Length | 13" |
| Width | 12" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet exhibits a thickness of 0.589 inches, a length of 13 inches, and a width of 12 inches. Composed of Ti-6Al-4V, it offers an outstanding strength-to-weight ratio, excellent tensile strength, and superior corrosion resistance, particularly in aggressive environments common in hydraulic fluid systems. Its biocompatibility and fatigue strength further enhance its suitability for demanding applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity before cutting. 2. Utilize appropriate cutting tools designed for titanium alloys. 3. Ensure proper surface preparation for any subsequent welding or joining processes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys, leading to tool wear and poor cut quality. | Employ specialized carbide or diamond-tipped cutting tools and maintain adequate coolant flow during machining. |
| Inadequate surface preparation before welding, resulting in porosity and compromised weld strength. | Thoroughly clean and degrease the titanium surface using appropriate solvents and a wire brush specifically for titanium to remove oxides and contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic cylinder components, High-pressure fluid conduits, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||