Engineered for extreme environments, this Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and unparalleled corrosion resistance. Ideal for critical components in pulling and lifting systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.755" |
| Length | 18" |
| Width | 47" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits superior mechanical properties, including a tensile strength of approximately 130 ksi and a yield strength of 120 ksi. Its density of 4.43 g/cm³ provides a significant weight advantage over steel in this 0.755-inch thickness, 18-inch length, and 47-inch width configuration. This alloy's excellent fatigue strength and resistance to seawater and chloride environments make it indispensable for offshore lifting equipment, marine hardware, and aerospace structural components where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environment. 2. Ensure all cutting, machining, and forming operations are performed using appropriate tooling and lubrication to maintain material integrity. 3. Follow established welding procedures for Titanium Grade 5 if fabrication is required, utilizing inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without considering titanium's unique properties. | Employ specialized tooling, slower speeds, and appropriate coolants when machining or forming titanium to prevent galling and excessive heat buildup. |
| Inadequate surface preparation before welding or bonding, leading to compromised joint strength. | Thoroughly degrease and clean all surfaces to be joined, ensuring a pristine finish to achieve optimal weld penetration or adhesive bond. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Offshore lifting equipment components, Marine structural elements, Aerospace framework and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||