This Titanium Grade 5 stock sheet is engineered for critical pulling and lifting operations, offering exceptional strength-to-weight ratio and superior corrosion resistance for extreme environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.132" |
| Length | 37" |
| Width | 40" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.132 inches in thickness, 37 inches in length, and 40 inches in width. Its alpha-beta alloy structure provides excellent mechanical properties, including high tensile strength (over 130 ksi) and fatigue resistance, critical for dynamic load-bearing scenarios. The material's inherent biocompatibility and inertness also make it suitable for specialized, clean environments, while its low density (approximately 4.43 g/cm³) minimizes dead weight in complex lifting assemblies and reduces operational energy consumption.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling designed for titanium alloys. 3. Carefully deburr all edges to prevent stress risers and improve handling safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling or lubrication. | Employ carbide or diamond-tipped cutting tools with high-speed steel and adequate coolant to prevent excessive heat buildup and tool wear. |
| Failing to account for titanium's lower modulus of elasticity in structural design. | Incorporate design considerations for increased deflection compared to steel when designing components that utilize this sheet. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom winch drum fabrication, Reinforcement plates for heavy-duty lifting equipment, Specialized structural components in marine salvage operations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||