This Titanium Grade 5 stock sheet is engineered for critical hydraulic applications requiring exceptional durability. Its robust construction and superior material properties ensure reliable performance under extreme conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.937" |
| Length | 17" |
| Width | 34" |
Built to exacting engineering tolerances, this 0.937-inch thick Titanium Grade 5 stock sheet measures 17 inches in length and 34 inches in width. Grade 5 titanium, also known as Ti-6Al-4V, offers an unparalleled combination of high strength, low density, and excellent corrosion resistance, making it ideal for high-pressure hydraulic components, fluid power systems, and subsea equipment where material integrity is paramount. Its biocompatibility and resistance to harsh environments further enhance its suitability for specialized hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and machining techniques for titanium alloys. 3. Weld using inert gas shielding (e.g., Argon) for optimal joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication tools without proper coatings or cooling. | Employ specialized tooling designed for titanium, with appropriate cooling lubricants to prevent overheating and tool wear. |
| Inadequate weld joint preparation or atmospheric contamination during welding. | Thoroughly clean weld edges and maintain a consistent inert gas shield to prevent oxidation and embrittlement of the weld zone. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Fluid power system components, Subsea hydraulic equipment housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||