This robust Titanium Grade 5 stock sheet is engineered for extreme pulling and lifting operations, offering unparalleled strength, lightweight characteristics, and exceptional corrosion resistance for critical industrial environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.998" |
| Length | 37" |
| Width | 31" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.998 inches, a length of 37 inches, and a width of 31 inches. This alloy exhibits a remarkable tensile strength exceeding 130 ksi and a yield strength over 120 ksi, coupled with excellent fatigue strength and a density approximately 60% that of steel. These properties make it ideal for aerospace components, marine hardware, offshore equipment, and high-performance structural elements where reliability under extreme stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper surface preparation on all mating components, removing any contaminants. 2. Utilize appropriate machining techniques for Titanium Grade 5, considering its hardness and potential for galling. 3. Employ high-strength fasteners or welding procedures specifically rated for Titanium Grade 5, following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners without appropriate coatings or grades. | Select fasteners specifically designed for titanium alloys to prevent galvanic corrosion and ensure structural integrity. |
| Machining at excessively high speeds or with insufficient coolant. | Employ slower cutting speeds and ample coolant to manage heat and prevent tool wear or material damage. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Offshore structural components, Aerospace load-bearing elements, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||