Engineered for extreme environments, this Titanium Grade 5 stock sheet provides unparalleled corrosion resistance and structural integrity. Ideal for critical components in plumbing and janitorial systems where longevity and reliability are paramount.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.886" |
| Length | 47" |
| Width | 21" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.886 inches thick, 47 inches in length, and 21 inches in width. Possessing exceptional strength-to-weight ratio, excellent fatigue strength, and superior resistance to a wide range of corrosive media, it is indispensable for high-performance plumbing fixtures, chemical processing equipment, and demanding janitorial infrastructure where conventional materials fail. Its biocompatibility also makes it suitable for specialized sanitary applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping equipment is calibrated for titanium. 2. Clean all surfaces thoroughly to remove any contaminants prior to fabrication. 3. Utilize appropriate welding or joining techniques for Titanium Grade 5, adhering to industry best practices for inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ specialized carbide or diamond-tipped cutting tools designed for titanium alloys and ensure adequate cooling to prevent thermal damage. |
| Inadequate surface preparation before joining. | Thoroughly degrease and mechanically abrade the joint surfaces to ensure optimal weld penetration and bond strength. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Corrosion-resistant piping systems, High-pressure valve components, Specialized sanitary fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||