This Titanium Grade 5 stock sheet delivers exceptional performance for high-stress pulling and lifting applications. Its superior strength-to-weight ratio and corrosion resistance ensure reliability in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.875" |
| Length | 22" |
| Width | 17" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet measures 0.875 inches thick, 22 inches in length, and 17 inches in width. Composed of Ti-6Al-4V alloy, it exhibits an ultimate tensile strength exceeding 130 ksi and a yield strength of at least 120 ksi, coupled with excellent corrosion resistance and a high strength-to-weight ratio. These properties make it ideal for custom fabricated components in marine, aerospace, and heavy industrial pulling and lifting equipment where durability and weight savings are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility and dimensional requirements for the intended application. 2. Cut the stock sheet to precise specifications using appropriate cutting tools for titanium. 3. Smooth and deburr all cut edges to prevent stress concentrations and ensure safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication or cooling. | Employ specialized carbide or diamond-tipped cutting tools designed for titanium, utilizing flood coolant or high-pressure air for effective cooling and chip evacuation. |
| Ignoring the work hardening characteristics of Titanium Grade 5 during fabrication. | Minimize cold working by using appropriate machining speeds and feed rates, and consider annealing if significant deformation is required. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom fabrication of specialized lifting eyes and slings, Reinforcement plates for heavy-duty pulling mechanisms, Components for marine winch systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||