This high-performance Titanium Grade 5 stock sheet is specifically engineered for robust hydraulic system components. Its exceptional strength-to-weight ratio and superior corrosion resistance ensure longevity and reliability in the most demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.818" |
| Length | 23" |
| Width | 15" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet measures 0.818 inches in thickness, 23 inches in length, and 15 inches in width. Composed of Ti-6Al-4V alloy, it provides an outstanding combination of high strength, low density, and excellent corrosion resistance, making it ideal for critical hydraulic manifold blocks, cylinder barrels, and high-pressure fittings. Its biocompatibility and non-magnetic properties are also advantageous in specialized hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free of debris, and properly machined to specified tolerances. 2. Apply appropriate aerospace-grade sealant or gasket material to sealing surfaces as per system design. 3. Carefully position the sheet and secure using designated fasteners, torquing to the manufacturer's recommended specifications in a star pattern.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and degrease all mating surfaces. Inspect for any machining imperfections or burrs that could compromise the seal. |
| Over-torquing or under-torquing fasteners, causing stress or leaks. | Utilize a calibrated torque wrench and follow the specified torque sequence and values diligently. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifold Blocks, High-Pressure Cylinder Barrels, Corrosion-Resistant Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||