Engineered for extreme environments, this Titanium Grade 5 stock sheet offers unparalleled strength and corrosion resistance. Its substantial 0.774" thickness ensures durability in high-pressure plumbing and demanding janitorial installations.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.774" |
| Length | 41" |
| Width | 13" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet is manufactured to exacting standards, measuring 0.774 inches thick, 41 inches in length, and 13 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it delivers a superior strength-to-weight ratio, exceptional corrosion resistance in aggressive chemical and marine environments, and a high melting point suitable for critical infrastructure. This material is ideal for fabricating custom fittings, tanks, and structural components within plumbing and janitorial systems where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with surrounding system components and operating environment. 2. Utilize appropriate cutting and shaping tools designed for titanium alloys. 3. Employ certified welding procedures for titanium Grade 5 if fabrication is required, ensuring proper shielding gas and pre/post-heating. 4. Securely fasten fabricated or installed components using titanium-grade fasteners or approved joining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, leading to rapid tool wear and poor cut quality. | Employ specialized carbide or diamond-tipped tooling designed for cutting titanium alloys. |
| Inadequate shielding gas during welding, resulting in brittle welds and oxidation. | Utilize an argon-rich shielding gas and ensure a consistent, contamination-free weld zone. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom piping and manifold fabrication, Corrosion-resistant tank and vessel lining, High-pressure system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||