This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio. Precisely manufactured to your specifications for critical pulling and lifting operations where performance and reliability are paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.733" |
| Length | 32" |
| Width | 33" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.733 inches thick, 32 inches in length, and 33 inches in width. Grade 5 titanium exhibits superior strength, excellent corrosion resistance, and biocompatibility, making it ideal for aerospace components, marine structures, and high-performance industrial equipment. Its high tensile and yield strength ensure optimal performance under extreme loads. This material is commonly used in applications demanding lightweight yet exceptionally strong structural elements for pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project requirements. 2. Ensure proper handling procedures to prevent surface damage and maintain material integrity. 3. Integrate into the pulling or lifting system following design specifications and relevant safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting or welding parameters for titanium alloys. | Consult welding procedures specific to Titanium Grade 5 and use appropriate cutting tools and techniques to avoid material degradation or stress. |
| Inadequate surface preparation before assembly or coating. | Thoroughly clean and degrease the titanium surface to ensure optimal adhesion of coatings or welding integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-stress structural components in lifting equipment, Custom fabricated parts for marine pulling systems, Aerospace and defense applications requiring lightweight strength.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||