This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and outstanding corrosion resistance. Precisely manufactured to stringent standards, it’s engineered for demanding applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.731" |
| Length | 24" |
| Width | 23" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.731 inches, a length of 24 inches, and a width of 23 inches. Meeting ASTM B265 Grade 5 specifications, it exhibits a typical tensile strength exceeding 130 ksi and a yield strength over 120 ksi. Its excellent biocompatibility and resistance to saltwater and various chemicals make it suitable for extreme environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining tools are appropriate for titanium alloys to prevent contamination and maintain material integrity. 2. Clean surfaces thoroughly with a suitable solvent prior to any joining or assembly processes. 3. Follow established welding or fastening procedures for Ti-6Al-4V, paying close attention to heat input and shielding gas requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling designed for carbon steel, leading to tool wear and poor cut quality. | Utilize specialized tooling with appropriate geometry, coatings, and cutting speeds for titanium alloys. |
| Inadequate cleaning of the material surface before welding, resulting in weld porosity and reduced strength. | Thoroughly degrease and chemically clean the weld area using appropriate solvents and abrasive methods. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||