This robust 304 stainless steel stock sheet provides exceptional durability and corrosion resistance. Precisely manufactured to specified dimensions, it is ideal for custom fabrication and heavy-duty applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.411" |
| Length | 28" |
| Width | 21" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.411 inches in thickness, with a length of 28 inches and a width of 21 inches. Composed of 18% chromium and 8% nickel, it offers excellent resistance to oxidation and a wide range of corrosive media, making it suitable for food processing equipment, chemical tanks, architectural cladding, and marine hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free of contaminants. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques, following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding rods, leading to premature corrosion at the weld joint. | Utilize 308L or 309L stainless steel welding electrodes to maintain the corrosion resistance of the base material. |
| Allowing carbon steel tools to contact the stainless steel during fabrication, causing iron contamination. | Employ dedicated stainless steel tools and maintain separate work areas to prevent cross-contamination and subsequent surface rust. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of industrial components, Architectural cladding and decorative elements, Food service equipment and processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||