This Titanium Grade 5 stock sheet delivers exceptional performance in critical pressure and temperature control systems. Its high strength-to-weight ratio and superior corrosion resistance make it ideal for harsh environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.663" |
| Length | 13" |
| Width | 26" |
A high-performance industrial component, this Titanium Grade 5 stock sheet measures 0.663 inches in thickness, 13 inches in width, and 26 inches in length. Composed of Ti-6Al-4V, it exhibits excellent tensile strength, fatigue resistance, and outstanding biocompatibility, making it suitable for extreme operating conditions. The material's passivation layer ensures remarkable resistance to a wide range of corrosive media, including saltwater, chlorides, and many industrial chemicals, crucial for maintaining system integrity under pressure and elevated temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate tooling designed for titanium. 3. Smooth all cut edges to remove any burrs or sharp points to prevent stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can cause excessive heat and tool wear. | Employ specialized carbide or high-speed steel tooling with adequate lubrication and cooling systems designed for titanium alloys. |
| Inadequate edge preparation leading to stress concentrations. | Thoroughly deburr and radius all cut edges to a smooth, consistent finish, typically with a file or a specialized edge-finishing tool. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace fluid handling systems, High-pressure chemical processing equipment, Marine heat exchangers and piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||