This Titanium Grade 5 stock sheet is engineered for critical hydraulic systems. Its exceptional strength-to-weight ratio and superior corrosion resistance make it the ideal material for high-pressure and corrosive environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 39" |
| Width | 41" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.639 inches in thickness, 39 inches in length, and 41 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it offers an excellent combination of high strength, low density, and outstanding corrosion resistance. This alloy is commonly employed in aerospace, marine, and chemical processing industries where performance under extreme conditions is paramount, including the fabrication of robust hydraulic components, manifolds, and structural elements requiring exceptional durability and reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools for titanium alloys. 3. Prepare edges for welding or joining according to established industry best practices for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys, leading to tool wear and poor cut quality. | Utilize specialized carbide or diamond-tipped cutting tools designed for machining titanium to achieve clean, accurate cuts. |
| Inadequate surface preparation before welding, resulting in compromised weld integrity and potential failure. | Thoroughly clean and degrease the joint area, and consider inert gas purging to prevent oxidation during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifolds, Pressure Vessels, Pump Housings, Valve Components, Structural Supports in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||