Engineered from premium Titanium Grade 5, this stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured for critical pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.534" |
| Length | 19" |
| Width | 46" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet measures 0.534 inches thick, 19 inches in length, and 46 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it boasts a high tensile strength of 130,000 psi and a yield strength of 120,000 psi, with excellent corrosion resistance in aggressive environments. Its high operating temperature limit and lightweight nature make it suitable for demanding aerospace, marine, and chemical processing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface imperfections or dimensional deviations. 2. Ensure mating surfaces are clean and free from contaminants. 3. Fabricate and install according to project-specific engineering drawings and relevant industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without appropriate cooling. | Employ carbide tooling and adequate coolant to prevent overheating and tool wear during fabrication. |
| Improper welding procedures leading to embrittlement. | Utilize inert gas shielding (e.g., Argon) and maintain strict control over heat input during welding to preserve material integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Heat exchanger components, Corrosion-resistant piping systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||