This Titanium Grade 5 stock sheet is engineered for extreme hydraulic environments. Its exceptional strength-to-weight ratio and superior corrosion resistance ensure reliable performance in critical systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.505" |
| Length | 12" |
| Width | 17" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.505 inches, a length of 12 inches, and a width of 17 inches. Exhibiting an ultimate tensile strength of 130-150 ksi and a yield strength of 120 ksi, it is renowned for its excellent biocompatibility and exceptional resistance to saltwater and a wide array of industrial chemicals. This material's inherent durability and low modulus of elasticity make it ideal for applications demanding high fatigue strength and resistance to stress corrosion cracking.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surrounding hydraulic system components are clean and free of debris. 2. Carefully position the Titanium Grade 5 stock sheet according to the design specifications for your component. 3. Secure the sheet using appropriate welding, fastening, or machining techniques as dictated by the application's engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper welding parameters for Titanium Grade 5, leading to embrittlement or loss of strength. | Utilize inert gas shielding (e.g., Argon) and strictly adhere to recommended welding procedures for Ti-6Al-4V, including pre-heating and post-weld heat treatment if specified. |
| Using standard machining tools and speeds not optimized for titanium alloys, resulting in tool wear and poor surface finish. | Employ specialized cutting tools designed for titanium, and maintain appropriate speeds and feeds to manage heat and prevent galling. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic cylinder construction, Corrosion-resistant hydraulic manifold fabrication, Specialized fluid power system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||