This Titanium Grade 5 stock sheet is engineered for exceptional performance in extreme environments. Its superior strength-to-weight ratio and corrosion resistance make it ideal for critical pulling and lifting applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.463" |
| Length | 33" |
| Width | 30" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a minimum tensile strength of 128,000 psi and a yield strength of 120,000 psi. Its excellent fatigue strength and biocompatibility are crucial for demanding industrial operations. Dimensions are precisely maintained at 0.463" thickness, 33" length, and 30" width, ensuring consistent material properties and ease of integration into complex assemblies. Ideal for aerospace components, marine hardware, and high-performance industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material grade and dimensions against project specifications. 2. Clean the sheet surface thoroughly to remove any contaminants. 3. Integrate into the pulling or lifting assembly using appropriate fastening or welding techniques as per engineering design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners on titanium without proper consideration. | Employ titanium-specific fasteners or use appropriate plating and anti-seize compounds to prevent galling and galvanic corrosion. |
| Inadequate surface preparation before welding or bonding. | Ensure the titanium surface is meticulously cleaned and free of oxides or contaminants to achieve optimal weld or bond integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-stress structural components for cranes and hoists, Marine rigging and towing systems, Aerospace lifting and payload attachments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||