This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical pulling and lifting components. Engineered for extreme environments and demanding operational cycles.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.457" |
| Length | 18" |
| Width | 41" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.457 inches in thickness, 18 inches in length, and 41 inches in width. This aerospace-grade alloy boasts a minimum tensile strength of 130 ksi and yield strength of 120 ksi, with excellent fatigue strength and biocompatibility. Its low density (approximately 4.5 g/cm³) ensures lightweight yet robust performance in corrosive or high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate tooling for titanium. 3. Securely fasten or integrate into the pulling/lifting mechanism, adhering to all design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate modifications. | Utilize specialized carbide or diamond-coated tooling designed for machining titanium alloys to prevent excessive heat buildup and tool wear. |
| Improper welding procedures leading to embrittlement. | Employ inert gas shielding (e.g., Argon) during welding and maintain strict control over preheating and post-weld heat treatment if required by application. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom fabricated lifting beams and slings, Reinforcement plates for high-load winches, Components for specialized marine or offshore pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||