This Titanium Grade 5 stock sheet, measuring 0.435" x 39" x 13", is engineered for high-performance pulling and lifting systems, providing superior strength-to-weight ratio and corrosion resistance.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.435" |
| Length | 39" |
| Width | 13" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.435 inches, a length of 39 inches, and a width of 13 inches. Grade 5 titanium offers an exceptional balance of high strength, low density, and excellent corrosion resistance, making it ideal for environments where extreme conditions are encountered. Its remarkable fatigue strength and biocompatibility also contribute to its widespread use in critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Carefully position the sheet within the designated structural frame. 3. Secure using appropriate fastening methods as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper fastening leading to structural failure. | Utilize only aerospace-grade or manufacturer-specified fasteners designed for titanium alloys, ensuring proper torque values are applied. |
| Introducing contaminants during fabrication. | Maintain a clean fabrication environment and use dedicated tooling for titanium to prevent cross-contamination, which can compromise corrosion resistance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-stress structural components in lifting equipment, Reinforcement plates in marine pulling systems, Specialized subsea deployment hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||