This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to meet stringent industrial standards for critical pulling and lifting components.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.424" |
| Length | 25" |
| Width | 47" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.424 inches thick, 25 inches in length, and 47 inches in width. Exhibiting a tensile strength of approximately 138,000 psi and excellent fatigue strength, it is ideal for applications demanding high performance in corrosive environments. Its biocompatibility and light weight also make it suitable for specialized aerospace and medical device manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Ensure all cutting, drilling, or shaping operations are performed using appropriate tooling and cooling for titanium alloys. 3. Integrate sheet into the pulling or lifting assembly following established design and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling. | Employ specialized carbide tooling designed for titanium and utilize flood coolant or air cooling to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding or bonding. | Thoroughly clean all surfaces to remove any oxides, oils, or contaminants using appropriate degreasers and brushing to ensure optimal joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom structural components for marine pulling equipment, Reinforced elements in heavy-duty lifting fixtures, Subsea exploration and retrieval apparatus.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||