Engineered for extreme environments, this Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance. Ideal for critical pressure and temperature control systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.420" |
| Length | 23" |
| Width | 17" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.420 inches thick, 23 inches in length, and 17 inches in width. Exhibiting a tensile strength of 130-140 ksi and a yield strength of 120 ksi, this alloy offers excellent performance in high-stress and corrosive media. Its biocompatibility and fatigue resistance make it suitable for aerospace, medical implants, and demanding chemical processing equipment where reliability under pressure and temperature cycling is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or dimensional inaccuracies. 2. Verify compatibility with surrounding materials and environmental conditions. 3. Fabricate according to design specifications, ensuring proper joint preparation and welding procedures if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys, leading to poor edge quality and tool damage. | Employ specialized tooling with high-speed steel or carbide inserts, utilizing appropriate cooling lubricants for clean cuts and extended tool life. |
| Inadequate post-fabrication cleaning, resulting in residual contaminants that can compromise performance in critical applications. | Thoroughly degrease and decontaminate all surfaces using approved solvents and ultrasonic cleaning methods, especially before high-temperature or high-pressure operations. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Heat exchanger components, Aerospace structural elements, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||