This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance, ideal for critical components in pulling and lifting systems where performance and reliability are paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.396" |
| Length | 20" |
| Width | 46" |
Precision-manufactured to tight tolerances, this 0.396" thick Titanium Grade 5 stock sheet measures 20" in length and 46" in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it boasts a minimum tensile strength of 128,000 psi and a yield strength of 116,000 psi. Its excellent fatigue strength and biocompatibility make it a superior choice for aerospace, marine, and industrial applications requiring high performance under extreme conditions, including structural components for cranes, hoists, and winches.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any defects prior to fabrication. 2. Utilize appropriate cutting and machining techniques suitable for titanium alloys. 3. Ensure all fasteners and joining methods are compatible with Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can cause excessive heat and tool wear. | Employ specialized carbide or ceramic tooling designed for titanium machining, with adequate coolant flow. |
| Improper welding procedures leading to embrittlement or cracking. | Utilize inert gas welding (e.g., GTAW/TIG) in a clean, controlled environment with appropriate shielding gas to prevent contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-stress structural components for cranes and hoists, Custom fabricated lifting eyes and shackles, Reinforcement plates in marine pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||