This high-performance Titanium Grade 5 stock sheet is engineered for critical pulling and lifting applications. Its superior strength-to-weight ratio and exceptional corrosion resistance ensure longevity and reliability in harsh environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.362" |
| Length | 17" |
| Width | 13" |
Engineered for reliability and performance, this Titanium Grade 5 stock sheet offers a nominal thickness of 0.362 inches, a length of 17 inches, and a width of 13 inches. Composed of Ti-6Al-4V, it boasts an exceptional tensile strength of 130-140 ksi and a yield strength of 120-130 ksi, making it ideal for applications demanding high structural integrity under significant load. Its low density (0.163 lb/in³) minimizes overall weight without compromising capacity. This material exhibits excellent resistance to fatigue and stress corrosion cracking, crucial for repeated dynamic loading scenarios in pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free from contaminants before placement. 2. Accurately position the sheet according to design specifications for load-bearing points. 3. Securely fasten using appropriate, compatible hardware and techniques as dictated by the specific assembly and load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for titanium's strength or galvanic compatibility. | Always utilize aerospace-grade or specifically rated fasteners for titanium assemblies to prevent premature failure or galvanic corrosion. Consult material compatibility charts. |
| Exceeding the designed load capacity due to improper structural analysis of the sheet's integration. | Perform rigorous engineering analysis to ensure the sheet's load-bearing capacity within the final assembly meets or exceeds all operational requirements. Do not rely solely on the material's inherent strength. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom structural components for cranes and hoists, Reinforcement plates in winch systems, High-stress anchors and eye bolts for lifting slings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||