This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it the ideal material choice for high-performance hydraulic systems requiring reliability and longevity.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.353" |
| Length | 34" |
| Width | 19" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.353 inches thick, 34 inches in length, and 19 inches in width. Exhibiting excellent tensile strength, fatigue resistance, and biocompatibility, it is well-suited for environments prone to chemical attack and extreme pressures. The alloy's inherent properties ensure minimal deformation under load and sustained performance in corrosive media commonly found in hydraulic fluid systems, marine environments, and aerospace components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity before cutting. 2. Utilize appropriate cutting tools for titanium alloys (e.g., waterjet or EDM) to maintain material integrity. 3. Ensure proper joint preparation and welding procedures if fabrication is required, adhering to aerospace or ASME standards for titanium welding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, which can lead to excessive heat buildup and material damage. | Employ specialized tooling designed for titanium alloys and maintain adequate lubrication during cutting operations. |
| Inadequate cleaning of surfaces prior to welding, resulting in porosity and compromised weld strength. | Thoroughly degrease and inert-gas purge all welding surfaces to prevent atmospheric contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifold Blocks, High-Pressure Cylinder Components, Corrosion-Resistant Hydraulic Tubing & Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||