Engineered for extreme environments, this Titanium Grade 5 stock sheet offers superior strength-to-weight ratio, exceptional corrosion resistance, and high durability for critical pulling and lifting operations.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 28" |
| Width | 25" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.352 inches in thickness, 28 inches in length, and 25 inches in width. Composed of an alpha-beta titanium alloy (Ti-6Al-4V), it exhibits an ultimate tensile strength of approximately 130,000 psi and a yield strength of 120,000 psi, with a density of 4.43 g/cm³. Its excellent biocompatibility and resistance to saltwater and various chemicals make it ideal for aerospace, marine, and industrial lifting components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of contaminants. 2. Accurately cut to the required dimensions using appropriate tooling for titanium. 3. Securely fasten the sheet using high-strength, compatible fasteners, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ carbide-tipped or diamond-edged cutting tools with adequate cooling to prevent overheating and premature wear. |
| Improper surface preparation leading to reduced adhesion or premature corrosion. | Thoroughly degrease and abrade the surface if bonding or coating is required, following specific alloy preparation guidelines. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom structural components for heavy-duty lifting equipment, Reinforcement plates in marine pulling systems, Specialized brackets for aerospace payload handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||